物品:紧身衣
差别
这里会显示出您选择的修订版和当前版本之间的差别。
| 两侧同时换到之前的修订记录 前一修订版 后一修订版 | 前一修订版 | ||
|
物品:紧身衣 [2022/09/07 21:28] 小锁2 [Usage] |
物品:紧身衣 [2022/09/07 21:46] (当前版本) 小锁2 创建 |
||
|---|---|---|---|
| 行 29: | 行 29: | ||
| ===== Notes ===== | ===== Notes ===== | ||
| - | As noted on Venus#Real Venus, the hardsuit can survive at true Venus pressures, the Waste tank does not fill any faster at those pressures. | + | * As noted on Venus#Real Venus, the hardsuit can survive at true Venus pressures, the Waste tank does not fill any faster at those pressures. |
| - | Suit pressure set to 50-100 KPa (0.5 to 1 Earth atmospheres), Humans in-game tolerating 11 to ~250kPa and surviving 11 to ~300kPA) | + | * Suit pressure set to 50-100 KPa (0.5 to 1 Earth atmospheres), Humans in-game tolerating 11 to ~250kPa and surviving 11 to ~300kPA) |
| - | Suit temperature is normally set to 18-21°C, Humans in-game preferring 10-29°C, tolerating 0-39°C and surviving around -10 to 49°C | + | * Suit temperature is normally set to 18-21°C, Humans in-game preferring 10-29°C, tolerating 0-39°C and surviving around -10 to 49°C |
| - | Additional key bindings to control your suit functions can be set in the Game Settings ---> Controls. | + | * Additional key bindings to control your suit functions can be set in the Game Settings ---> Controls. |
| - | The maximum allowed pressure the filters can cope with in the Waste Tank is 4052kPa (well below its maximum pressure). Low/critical Oxygen warnings will occur close to this value as your Filters cease to function. | + | * The maximum allowed pressure the filters can cope with in the Waste Tank is 4052kPa (well below its maximum pressure). Low/critical Oxygen warnings will occur close to this value as your Filters cease to function. |
| - | The default filter is the CO2 filter, a gas generated by the Human character when consuming breathable gas | + | * The default filter is the CO2 filter, a gas generated by the Human character when consuming breathable gas |
| - | Make sure if you aren't using 100% Oxygen in your breathing gas that you add additional Filters! E.g. if you put the common "Air" mixture of 25% Oxygen + 75% Nitrogen into your tank, the Nitrogen would accumulate in your suit/helmet over time and suffocate you unless you have a Nitrogen filter to remove this. | + | * Make sure if you aren't using 100% Oxygen in your breathing gas that you add additional Filters! E.g. if you put the common "Air" mixture of 25% Oxygen + 75% Nitrogen into your tank, the Nitrogen would accumulate in your suit/helmet over time and suffocate you unless you have a Nitrogen filter to remove this. |
| - | If you have the correct filters and breathable gas but are still experiencing problems, refer to the 'Flush' function on your Space Helmet | + | * If you have the correct filters and breathable gas but are still experiencing problems, refer to the 'Flush' function on your Space Helmet |
| - | It is theoretically possible to mix EVA Suit elements and Hardsuit elements, although this is relatively uncommon | + | * It is theoretically possible to mix EVA Suit elements and Hardsuit elements, although this is relatively uncommon |
| - | Damaged suits can be recycled (assuming you have a new one to use!) | + | * Damaged suits can be recycled (assuming you have a new one to use!) |
| - | Equipping an Integrated Circuit (IC10) in the designated slot has a constant power draw of 5 watts from the suit battery. | + | * Equipping an Integrated Circuit (IC10) in the designated slot has a constant power draw of 5 watts from the suit battery. |
| - | Writing to the Error parameter with an Integrated Circuit (IC10) creates an audible sound, this could be used for custom alerts. | + | * Writing to the Error parameter with an Integrated Circuit (IC10) creates an audible sound, this could be used for custom alerts. |
| - | Data Network Properties | + | ===== Data Network Properties ===== |
| These are all Data Network properties of this device. | These are all Data Network properties of this device. | ||
| The Hardsuit is uniquely capable of accepting an Integrated Ciruit (IC10). Within a Hardsuit, this IC cannot toggle itself off and will run as long as there is battery power in the suit, until the IC is removed. It has these unique logic variables and interactions (along with the standard variables). | The Hardsuit is uniquely capable of accepting an Integrated Ciruit (IC10). Within a Hardsuit, this IC cannot toggle itself off and will run as long as there is battery power in the suit, until the IC is removed. It has these unique logic variables and interactions (along with the standard variables). | ||
| - | ==== Data Parameters ==== | + | ===== Data Parameters ===== |
| - | These are all parameters, that can be written to with a Logic Writer, Batch Writer, or Integrated Circuit (IC10). The outputs are listed in the order a Logic Writer's "VAR" setting cycles through them. | + | These are all parameters, that can be written to with a Logic Writer, Batch Writer, or Integrated Circuit (IC10). The outputs are listed in the order a Logic Writer's "VAR" setting cycles through them. |
| + | |||
| + | ^Parameter Name ^Data Type ^Description^ | ||
| + | |On|Boolean|Controls A/C power for the suit.| | ||
| + | |Lock|Boolean|Controls if the suit is currently locked or not. If locked (1) the "Filter" and "Air" buttons become locked.| | ||
| + | |Filtration|Boolean|Controls Filtration power for the suit.| | ||
| + | |Error|Integer|Controls the error value for the suit. The value can be written to be any integer value.| | ||
| + | |AirRelease|Boolean|Controls the suit air release. If the helmet is open while the air release in on, air is wasted.| | ||
| + | |Activate|Integer|Value range is 0 - 3. Writing to this data parameter seems to have no effect.| | ||
| + | |TemperatureSetting|Float|Controls the target temperature for the suit.| | ||
| + | |Setting|Integer|Doesn't do anything on it's own. Can be used to communicate with a logic transmitter.| | ||
| + | |PressureSetting|Float|Controls the target pressure for the suit. Only works while helmet is closed.| | ||
| + | |d0|Device|Interface for the suit helmet.| | ||
| + | |d1|Device|Interface for the backpack or jetpack| | ||
| + | ===== Data Outputs ===== | ||
| + | |||
| + | These are all parameters, that can be read with a Logic Reader or a Slot Reader. The outputs are listed in the order a Logic Reader's "VAR" setting cycles through them. | ||
| + | ^Output Name^Data Type^Description^ | ||
| + | |On|Boolean|Whether the A/C is on or off.| | ||
| + | |Lock|Boolean|Shows if the suit is currently locked or not. If locked (1) the "Filter" and "Air" buttons become locked.| | ||
| + | |Filtration|Boolean|Whether Filtration is enabled for the suit.| | ||
| + | |Error|Integer|The suit's error value. By default, if the suit has no filter it will write the error parameter to 1.| | ||
| + | |Combustion| ?|0 - ?| | ||
| + | |AirRelease|Boolean|Whether the air release is on or off. If the helmet is open while the air release in on, air is wasted.| | ||
| + | |Activate|Integer|Value range is 0 - 3. The value depends on equipped items like air tanks and filters.| | ||
| + | |VelocityRelativeZ|Float|The suit's relative Z velocity.| | ||
| + | |VelocityRelativeY|Float|The suit's relative Y velocity.| | ||
| + | |VelocityRelativeX|Float|The suit's relative X velocity.| | ||
| + | |VelocityMagnitude| ?|The suit's relative velocity magnitude.| | ||
| + | |TemperatureSetting|Float|The target temperature for the suit in Kelvin.| | ||
| + | |TemperatureExternal|Float|The air temperature outside of the suit in Kelvin.| | ||
| + | |Temperature|Float|The air temperature inside the suit in Kelvin.| | ||
| + | |Setting|Integer|Doesn't do anything on it's own. Can be used to communicate with a logic transmitter.| | ||
| + | |RatioVolatiles|Float|The ratio of Volatiles inside the suit.| | ||
| + | |RatioWater|Float|The ratio of Water inside the suit.| | ||
| + | |RatioPollutant|Float|The ratio of Pollutant inside the suit.| | ||
| + | |RatioOxygen|Float|The ratio of Oxygen inside the suit.| | ||
| + | |RatioNitrousOxide|Float|The ratio of Nitrous Oxide inside the suit.| | ||
| + | |RatioNitrogen|Float|The ratio of Nitrogen inside the suit.| | ||
| + | |RatioCarbonDioxide|Float|The ratio of Carbon Dioxide Oxide inside the suit.| | ||
| + | |PressureSetting|Float|The target pressure for the suit.| | ||
| + | |PressureExternal|Float|The air pressure outside of the suit.| | ||
| + | |Pressure|Float|The air pressure inside the suit.| | ||
| + | |PositionZ|Float|The suit's Z coordinate position.| | ||
| + | |PositionY|Float|The suit's Y coordinate position.| | ||
| + | |PositionX|Float|The suit's X coordinate position.| | ||
| + | |d0|Device|Interface for the suit helmet.| | ||
| + | |d1|Device|Interface for the backpack or jetpack.| | ||
| + | ===== Automation ===== | ||
| + | |||
| + | Some ideas for automating the suit using an Integrated Circuit (IC10) include | ||
| - | ^Parameter Name ^Data Type ^Description ^ | + | * Closing the helmet in a hostile atmosphere |
| - | |Open|Boolean |Opens the Autolathe, when set to 1. Closes the Autolathe, when set to 0. | | + | * Locking the helmet in a hostile atmosphere |
| - | |Activate |Boolean |Activates the Autolathe, when set to 1. Deactivates the Autolathe, when set to 0. Note: This can cause a minor bug to occur. (See Bugs) | | + | * Unlocking the helmet in a good atmosphere |
| - | |On |Boolean |Turns the Autolathe on, when set to 1. Turns it off, when set to 0. | | + | * Deactivating airflow, filtration, and AC when helmet is open and in a good atmosphere , and reactivating them when helmet is closed. |
| - | |RecipeHash |Integer |Set machine to recipe Number is calculated using hash on prefabname| | + | * Only activating filtration when CO2 levels are too high. This can greatly increase the lifetime of the filters, and reduces power use. |
物品/紧身衣.1662557321.txt.gz · 最后更改: 2022/09/07 21:28 由 小锁2
